Nicotine salt liquids upgrades and spare parts (1000 mAh)
Nicotine salt liquids advice for Liverpool, covering versus, what to look for and where the trade-offs actually sit.
The Liverpool market for nicotine salt liquids has grown steadily, and the choice on offer now is genuinely broad. What surprised us most was how little the 0.6 Ω mesh coil changes the draw character compared with the 70:30 PG/VG liquid sitting in the chamber.
We spent weeks putting nicotine salt liquids options through their paces so the recommendations here reflect real use. Pricing in Liverpool shifts with import duty, so the figures here reflect current GBP rates rather than a fixed list price.
Vapour production is more than adequate at 90, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
We would pair the Uwell G2 with a 70:30 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.6 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Worth noting that the magnetic contact takes a small amount of care to keep clean, which we cover in the maintenance section below. For long-session users, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
The build quality on Uwell G2 is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over Type-C fast charge takes about 70 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.
Battery behaviour is where the Uwell G2 earns its keep: the 2500 mAh cell holds a usable charge for most of a day at 90 and recharges over Type-C fast charge. Flavour tracking stays consistent from the first day to roughly the 0.6 Ω mesh mark before the profile flattens and a swap makes sense. In Liverpool, availability of the 0.6 Ω mesh coil is the practical bottleneck, not the device itself.
The 3.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 756 full puffs from a charge at 6 mg/ml, based on average session length in our testing. Delivery across Liverpool is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.
Specifications
Here is what the engineering actually delivers, without the marketing language.
| Reference model | Uwell G2 |
|---|---|
| Brand family | RELX |
| Battery capacity | 2500 mAh |
| Power range | 90 W |
| Liquid capacity | 3.5 ml |
| Coil | 0.6 Ω mesh |
| Bottle size | 50 ml |
| Liquid ratio | 70:30 PG/VG |
| Nicotine strength | 6 mg/ml |
| Material | anodised aluminium |
| Charge port | Type-C fast charge |
| Connector | magnetic contact |
| Airflow | mesh window |
| Mouthpiece | wide bore |
Flavour and performance notes
A representative profile is Raspberry Lemonade: sweet, tart, described as summer lemonade with a raspberry accent. On a 70:30 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.