updated guide to Nicotine salt liquids in Liverpool (Uwell G2)
Nicotine salt liquids advice for Liverpool, covering flavour blending, what to look for and where the trade-offs actually sit.
Anyone who has compared nicotine salt liquids options in Liverpool quickly learns that specification lists only tell part of the story. Expect roughly 1307 full puffs from a charge at 20 mg/ml, based on average session length in our testing.
Local availability in Liverpool shapes the practical answer more than the marketing does. Vapour production is more than adequate at 50, and pushing beyond that adds heat rather than anything worth carrying.
Two things to check before ordering: the Type-C fast charge socket on the base and whether the 0.6 Ω mesh coil is the newer generation. Battery behaviour is where the Innokin X earns its keep: the 650 mAh cell holds a usable charge for most of a day at 50 and recharges over Type-C fast charge. We would pair the Innokin X with a 40:60 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Worth noting that the Q-Plus takes a small amount of care to keep clean, which we cover in the maintenance section below. For daily vapers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
The wide bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 40:60 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 0.6 Ω mesh mark before the profile flattens and a swap makes sense. In Liverpool, availability of the 0.6 Ω mesh coil is the practical bottleneck, not the device itself.
Specifications
Every unit in the Innokin X family shares the same core platform, so the differences come down to the numbers below.
| Reference model | Innokin X |
|---|---|
| Brand family | Lost Vape |
| Battery capacity | 650 mAh |
| Power range | 50 W |
| Liquid capacity | 2.0 ml |
| Coil | 0.6 Ω mesh |
| Bottle size | 1.3 ml |
| Liquid ratio | 40:60 PG/VG |
| Nicotine strength | 20 mg/ml |
| Material | stainless steel |
| Charge port | Type-C fast charge |
| Connector | Q-Plus |
| Airflow | fixed |
| Mouthpiece | wide bore |
Flavour and performance notes
A representative profile is Strawberry Cream: creamy, sweet, described as smooth strawberry custard with a light dairy note. On a 40:60 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.6 Ω mesh mark before the coil begins to mute it.
Practical considerations in Liverpool
Availability in Liverpool is the factor that decides most outcomes here. Confirm the 0.6 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.
